Call: 0116 3500102
Your basket is empty
Palace Easi Flex 1 Part Flexible Standard Set White 20KGPalace Easi Flex 1 Part Flexible Standard Set White 20KG
Move your mouse over image or click to enlarge

Palace Easi Flex 1 Part Flexible Standard Set White 20KG

£16.99 each inc VAT

Quantity Discounts:

  • 5+ for £14.99 each and save 12%
  • 10+ for £14.25 each and save 17%
Usually despatched in 24 hours

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in white. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels. 

This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on white\light wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing.

Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms.

The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.


Technical Data Sheet:
COSHH Data Sheet:

Ask a new question about this product

No questions have yet been asked about this product.

Add your own review of this product

Previous customer reviews

Review by -

Excellent quality S1 deformable (flexible) adhesive

Adhesive is a personal choice and my motto is buy the highest spec adhesive you can afford. Trade Price Tiles adhesive range is very restricted, and this is in fact the highest spec adhesive they sell, but it is actually the cheapest. Go figure.

S1 means deformable by 5mm. The best spec adhesive money can buy is S2 (10mm deformation).

I have never used Palace before, but trust that European Standards for product labelling mean that Brand A's S1 adhesive is as good as Brand B's S1 adhesive, therefore purchased this. I was not disappointed. It mixes to a nice consistency, sticks well, and is reasonably priced.

It is normal set meaning wait 24 hours before grouting. If I had needed rapid set I would have bought an S1 adhesive from somewhere else, as this retailer don't sell a rapid set S1 adhesive (at the time of writing).

In my opinion why buy an inferior spec i.e. non-S1, which purports to be "flexible"?

European Standards exist to cut out all the marketing hype and nonsense that manufacturers use, and allow customers to compare apples with apples.

Buy the highest spec adhesive you can afford. A C2 S1 adhesive is the minimum I will ever use.

Value for money
Quality
Review by -

great glue

nice glue to use fast service

Value for money
Quality

Please wait...

{{var product.name}} was added to your basket
{{var product.name}} was removed from your basket